0 votes
asked by
Minimum distance between two SRF2I019 antennas
I'm working in a project using 3 868 modules in a system. I would ask you how to place 3 SRF2I019 antennas in order to minimize interferences between such antennas.  Answer may include distance and/or orientation between antennas

Please log in or register to answer this question.

1 Answer

0 votes
answered by
Hello Jlsalom,

The peak gain lobe is straight off the face of the side where the coax solders to so if you are holding the antenna with the coax in your hand and the cable in your hand the peak gain lobe you be hitting you in the face. The null, or low gain area, comes out the top of the antenna so if you were to extend the coax cable past the solder point that would be the direction of the low gain null or depression in the pattern.

If you are placing 3 of these antennas orthogonality is your friend. I would start by placing one antenna with the coax going down to the ground. The second antenna I would place to the left of the first antenna but rotate it 90 degrees clockwise to the coax is point away from the first antenna. place the two antennas 20mm apart.

The third antenna I would place to the right of the first antenna rotated counter-clockwise with its coax pointing away from the first antenna and spaced 20mm apart from the first antenna. This orientation should get you at least -10dB of isolation (S21 between antennas). If more isolation is needed increase the 20mm spacing between antennas 10mm more.

Best regards,

Geoff Schulteis

Meet the moderators

Nansen Tsai

Engineering Manager Nansen has a wealth of technical RF and wireless knowledge, with particular expertise in RF development and problem-solving.

Geoff Schulteis

Senior Antenna Apps Specialist at Antenova Geoff is an antenna design-in and OTA measurement specialist. His knowledge of FCC and world carrier requirements is second-to-none.

Steve Bradburn

Senior Antenna Engineer at Antenova With over 25 years’ experience in manufacturing, test and design, Steve has a wealth of RF and measurement knowledge across many industry sectors.


Antennas: The Comparison Guide

Find the perfect antenna for your project