QUESTION

asked by
reopened by
Antenna Placement on casing
Hi,

 I need to design a casing for one board which contains of GNSS, LTE, WIFI/BT &DIVERSITY antennas. could you Please suggest me the position of antennas to get best performance.

Casing Dimensions : 180 X 110 X 40 MM

Thanks & Regards

siva

Please log in or register to answer this question.

2 Answers

answered by
Hello Siva,

Please direct this specific question to sales@antenova.com or send a message through the "Contact us" page at our main website, www.antenova.com. We can better assist you through one on one contact with our engineering team.

Thank you,

Dan Dobransky
answered by
HI Silva,

Typically you will need to have as much distance between each antenna as possible.  The antennas will need to be placed around the perimeter of the board and away from things such as batteries, displays and taller metal components like RF shield cans and connectors.

If you are using two LTE antennas they should be mounted 90 degrees apart from each other to maximize the reception of different polarized signal (called orthogonal diversity) and at least 50mm away from each other (called spatial diversity).
You should also consider that some antennas work better on the corner of your board versus others that work well in the center of the long or short edge of the device.

Some types of plastics will also dampen your signal such as glass filled nylon so keep this in mind when tuning the antennas in your chassis as this will also tend to shift the resonant frequency of the antenna. It is a good rule of thumb to always tune your antennas as close to the environment that they will operate in.

Best regards,

Geoff S.

Meet the moderators

Yu Kai Yeung

Antenna Engineer at Antenova Yu Kai is an antenna expert with over 10 years of experience in the design and testing of antennas. He has experience helping customers with certification testing, combined with his knowledge of RF measurement procedures.

Raymond Lee

Senior Antenna Engineer at Antenova Raymond has a wealth of experience in RF and antennas across many industry sectors. He has over 20 years of experience in electronics design and manufacturing.

download-guide-image

Antennas: The Comparison Guide

Find the perfect antenna for your project

Download
...