QUESTION

asked by
Narrow band GNSS Antenna

I am working on SOS connected device. For this I need a Narrow Band GNSS antenna. I am looking for SMD PCB antennas. Can you please suggest if you any of them?

Antenna Requirements:

GNSS - Frquency range: 1559 - 1609 MHz, Polarization: Linear or RHCP, VSWR: < 2 (Typ), Passive antenna gain: >0 dBi, Active antenna noise figure: <1.5 dB, Active antenna gain: >0 dBi, Active antenna embedded LNA gain: < 17dB          

Please log in or register to answer this question.

1 Answer

answered by
Hi Praveen,

Our M20057 active GNSS antenna will fit your requirements.

Best regards,

Geoff S.
commented by

Hi Geoff,

Thank you for your reply. Will look into it. And also I am searching for GSM antennas (SMD PCB). Can you please suggest if you any of them?

GSM Antenna Requirements:

LTE/GSM: VSWR <= 2, Efficiency: > 30%, Max. Input Power: 50W, Input Impedance: 50ohm, Cable Insertion Loss: <1dB (LTE B5/B8/B12/B13/B18/B19/B20/B26/B27/B28/B31/B71/B72/B73/B85, GSM850/EGSM900), Cable Insertion Loss: <1.5dB (LTEB1/B2/B3/B4/B25/B66, DCS1800/PCS1900)

Best Regards,

Praveen

commented by
Hi Praveen,

I would recommend the Lepida for your SMD PCB mounted antenna.  It covers most of the bands you are looking for except B72 and B73. It will meet your performance requirements for the bands it covers. There will be no cable insertion loss since it is a SMD antenna.
Best regards,

Geoff S.

Meet the moderators

Yu Kai Yeung

Antenna Engineer at Antenova Yu Kai is an antenna expert with over 10 years of experience in the design and testing of antennas. He has experience helping customers with certification testing, combined with his knowledge of RF measurement procedures.

Raymond Lee

Senior Antenna Engineer at Antenova Raymond has a wealth of experience in RF and antennas across many industry sectors. He has over 20 years of experience in electronics design and manufacturing.

download-guide-image

Antennas: The Comparison Guide

Find the perfect antenna for your project

Download
...