asked by
SR4C033-R Layout

We are planning to use SR4C033-R in our design. The antenna will be placed on the right edge of the PCB with the suggested clearance. On the left edge we have an RGB led for indication. Can we have an LED to the left side of the antenna?



Please log in or register to answer this question.

1 Answer

answered by
Hi Ashok,

It is ok to place the LEDs to the left of the antenna as long as they are at least 15mm away from the antenna.  We also suggest that the traces that feed the LEDs be placed on the inner layers of the board to isolate them from radiating noise that could be picked up by the antenna.
Best regards,

Geoff S.
commented by
Thank you Geoff.
commented by
Happy to help!!

Meet the moderators

Yu Kai Yeung

Antenna Engineer at Antenova Yu Kai is an antenna expert with over 10 years of experience in the design and testing of antennas. He has experience helping customers with certification testing, combined with his knowledge of RF measurement procedures.

Raymond Lee

Senior Antenna Engineer at Antenova Raymond has a wealth of experience in RF and antennas across many industry sectors. He has over 20 years of experience in electronics design and manufacturing.


Antennas: The Comparison Guide

Find the perfect antenna for your project